Replacement RFID Non-Contact Safety Switch for ATS Safety Guards

Part Number:

ATS-RFID-REP:     REPLACEMENT SWITCH & ACTUATOR ONLY.  RFID Safety Switch, Requires 24VDC Power Supply, 2x Safety Contacts,  3 meter long cable. Mechan part # SS-C-20-03M 

Features

• S-Type are master coded RFID (Radio Frequency Identification) safety
  switches with volt free contact outputs. They offer more protection against
  manipulation over the standard switches.
• The 2 safety contacts allow for dual channel wiring to a safety relay to achieve a higher safety rating
• This interlock switch has the same mounting bolt pattern as the standard magnetic switch used on ATS milling machine, drill press, and hinged lathe guards
• Must be wired with a 24V DC power supply. See "Interlock Specs" PDF above for more wiring info.
• The switch body has a Red / Green LED indicator light for troubleshooting.
• This is just the interlock/safety switch with (4) M4 security torx screws and an aluminum spacer plate. No mounting brackets are included.  We also carry retrofit kits for ATS guards on a separate page.
• Please note that the two normally open (N/O) are described when the switch and actuator are apart. The normally open will close when the actuator is brought within operating distance of the switch.